Carrinho de compras
ERYONE PLA 3D Printer Filament 1.75mm, Dimensional Accuracy +/- 0.05 m ERYONE PLA 3D Printer Filament 1.75mm, Dimensional Accuracy +/- 0.05 m
ERYONE PLA 3D Printer Filament 1.75mm, Dimensional Accuracy +/- 0.05 m ERYONE PLA 3D Printer Filament 1.75mm, Dimensional Accuracy +/- 0.05 m
ERYONE PLA 3D Printer Filament 1.75mm, Dimensional Accuracy +/- 0.05 m ERYONE PLA 3D Printer Filament 1.75mm, Dimensional Accuracy +/- 0.05 m
ERYONE PLA 3D Printer Filament 1.75mm, Dimensional Accuracy +/- 0.05 m ERYONE PLA 3D Printer Filament 1.75mm, Dimensional Accuracy +/- 0.05 m
ERYONE PLA 3D Printer Filament 1.75mm, Dimensional Accuracy +/- 0.05 m
ERYONE PLA 3D Printer Filament 1.75mm, Dimensional Accuracy +/- 0.05 m
ERYONE PLA 3D Printer Filament 1.75mm, Dimensional Accuracy +/- 0.05 m
ERYONE PLA 3D Printer Filament 1.75mm, Dimensional Accuracy +/- 0.05 m
1/ 4

ERYONE PLA 3D Printer Filament 1.75mm, Dimensional Accuracy +/- 0.05 mm 1kg (2.2LBS)/Spool

Oferta 50,00 EUR
49,00 EUR
99,00 EUR
Color
Green
Red
Grey
Transparent
Quantidade
Ainda resta 0 de estoque
Cálculo do preço por volume
Quantidade
Preço
1+
49,00 EUR cada

 

ERYONE PLA Filament has the advantages of easy printing, low shrinkage, and excellent layer bonding.
 
Applicable to 99% of 3D FDM printers on the market, friendly to beginners.
High purity raw materials, corn.

 

Technical Specification

Print Any Model You Want with ERYONE PLA Filament.

Material: PLA

Length:340m

Diameter: 1.75mm±0.03mm

Print Temperature: 190-220℃

Heated Bed Temperature: 55-70°C

Recommended Printing Temperature: 210-220℃

Recommended Print Speed: 30-100m

PLA A+6

The Difference between White&Gray&Black

Showcase:

FAQ     

1.Q: Can PLA be used to print tableware?

A: Not recommended. Although PLA is degradable, food-grade raw material, the PLA with toner is non-food grade. If you really want to print a set of tableware, transparent PLA is suggested.

2.Q: The nozzle is clogged by PLA, and how can I solve it?

  A:  Inconstant filament diameter, the lower nozzle temperature and frequent replacement with different kinds of filaments will lead to this problem. So, before you get started, clean the nozzle and turn up the temperature to a proper value.

3.Q: My prints have web-like strings (stringing) issues. How can I troubleshoot it?

  A: Too high temperature makes the PLA filament melt and flow so fast. Please turn the temperature down to a proper value.  

      The retracting parameters are improper, so adjust the retracting length and speed.  

4.Q: There are too much melted filament around the nozzle. What should I do?

  A: This problem can be attributed to over-high temperature, low printing speed, and in the slice software, the nozzle diameter doesn’t match with the extrusion output.

5.Q: The PLA filament was perfect when I opened the package. After several times of intermittent printing, my PLA filament snaps by accident during printing. Why?

A: Normally, the PLA filament in the printing process will not snap by themselves. However, after being affected by moisture, the degradable material PLA will be more brittle and easier to break, so you should pay attention to dampproof.

6.Q: The surface of my print isn’t very smooth, and the extruded filament has inconstant diameters. Why?

  A: The printing temperature is too high or too low. The temperature doesn’t match well with the printing speed. You need to adjust the printing speed or temperature.

7.Q: Why my PLA-printed objects don't stick to the heated bed? How do I solve?

A: The distance between the nozzle and the bed is too far. Make sure your heated bed is leveled and it’s clean. Then judge if the printing temperature and heated bed temperature are too low, and our customers should adjust them to correct ranges.